First shots with my new luminous toys!

I could not wait one more minute to using my new Light Painting toys so that, as soon as I got off work last Friday I headed to a park located next to Hammersmith Bridge. Girlfriend and some patient friends joined me and my new light painting gear to take a bunch of shots. Before the show, we had 2 or 3 pints of beer each to increase the creativeness slightly! hehe.

It was freezing and windy (maybe one more pint would have helped with this??) so we did not find the most ideal conditions to spend as much time as I would have wanted to, but anyway, I started to see the potential of what I just built and it is quite promising. I believe this summer this will be a common plan for me and friends, and the good point is that they seem to enjoy it too.

We were 4 people and in most of the pictures every one of us contributed in some way, either moving the lights around, checking the stop watch, enhancing the background with a torch and so on and so forth.

Blog___DIY_Light_Rails_Gear_0043  Blog___DIY_Light_Rails_Gear_0044 Blog___DIY_Light_Rails_Gear_0045  Blog___DIY_Light_Rails_Gear_0046

The pictures were taken in the darkest spot we could find in the area, but as you can see the background is still too bright, meaning that I could not go slower than 1 minute of shutter speed without ruinning the frame! This time does not give too room for most ideas so next week I will try to find a more suitable location. Fingers crossed for the weather being a bit more thankful, hehe.

Advertisements

More DIY stuff! RGB LED Rails for light painting

After a couple of days of inactivity I am glad to be back again, and this time I bring with me more light painting DIY stuff. The main reason I haven’t posted is precisely that what I am sharing next has kept me busy . If you fancied what you saw in my previous “how-to” style post, which described how to build jigs for creating amazing Light Orbs, you are going to love this one too (or at least that is my intention).

In this occasion I am going to guide you through building Colour changing LED Light Rails.

… but what exactly is that??

To put you into context, this new toy is built of RGB LED strips, that come off the shelf in reels of different lengths. The strips are cuttable every 3 LEDS along the cutting marks, without damaging other parts. The LED size is 5mm x 5mm, being they separated about 3.5cm from one another (if you do the maths, those 5 meters contain 150 LEDs). As you will see in a minute, you can easily find on eBay a bundle that includes the reel, a 44 key remote controller, its IR receiver and a 12V transformer to power everything up for no more than a few quids.

The LED strips look as follows:

Blog___DIY_Light_Rails_Gear_0004

As the name already suggests, the LEDs are RGB, which stands for Red, Green and Blue that are the additive primary colours. This means that every individual LED is actually composed by 3 LEDs, one of each primary colours. Combining light of these colours in the right proportion (of intensity) any colour’s spectrum can be synthesised (even black which is the absence of light, although it is not too useful for our purpose, hehe).

We are going to cut and stick a custom length segment of this RGB LED strip onto a wooden stick, task that do not require any glue since the back side of the reel is self-adhesive.

What can I use it for??

Once we have the wooden beam with the LEDs on it, we need to power it up, switch it on and move it around in the dark while your camera’s shutter is open. The effects accomplished with the Light Rail are astonishing. By means of the remote, you can choose from a good range of colour sequences and speeds, adjust the brightness of the LEDs, make the LEDs to light in one single colour, etc. Combining all this and in a creative way will help you taking amazing light painting shots.

Is it too difficult to build??

I must say that the process is slightly more complex than the Light Orbs LED “bulbs” of the previous post, but nevertheless it is something almost anyone a bit dexterous can do. A bigger set of tools are required too, but nothing uncommon though. You will spend (or invest!) more time hands-on it, but the results well worth every part of it.

  • Difficulty: 8 out of 10
  • Time: 3 hours
  • Cost of the materials: £30 – £35.

Materials needed

Let’s get hands on it

STEP 1: Remove the adhesive protector sticker off the back of the strip. Place the pre-soldered connector in one end of the wooden beam and start sticking it towards the other end, as straight as you can.

I have chosen a wooden stick of  75cm x 2cm x 4cm. To be honest I planned to get it from a specialised shop but luckily enough, on Friday night I found kind of a table structure that was thrown away by one of my neighbours. It could have not been more convenient as it ended up being ideal for the job.

If you are not that lucky, you can always go to the shop and buy for a couple of pounds a stick of whatever length suits you best, but keep in mind that the longer the stick, the less portable it becomes and hence you eventually will get lazy to take it with you. On the other hand, long rails allow you to achieve certain effects that are simply not possible to get when you use a shorter version. Find the equilibrium point between length and practicality.

Blog___DIY_Light_Rails_Gear_0008  Blog___DIY_Light_Rails_Gear_0009

STEP 2: Once you have stuck the LEDs , cut the strip with scissors along the cutting mark closest to the edge.

Blog___DIY_Light_Rails_Gear_0010  Blog___DIY_Light_Rails_Gear_0011

This is what you should have by now!

Blog___DIY_Light_Rails_Gear_0012

STEP 3: Locate the IR controller box approximately in the middle of the stick and hold it in position with two screws like so:

Blog___DIY_Light_Rails_Gear_0016

STEP 4: From the IR Controller Box, two cables come out, one for the IR receiver and the other for interfacing the LEDs via a 4 way connector. Connect the connector of the LED strip to the IR Controller connector. These two cables are oversized in length but you do not want to cut them. Instead tidy up the excess of cable using the 4mm cable clips as convenient:

Blog___DIY_Light_Rails_Gear_0017  Blog___DIY_Light_Rails_Gear_0018

Blog___DIY_Light_Rails_Gear_0019

STEP 5: Fix the battery holders in position with some screws:

Blog___DIY_Light_Rails_Gear_0020  Blog___DIY_Light_Rails_Gear_0021  Blog___DIY_Light_Rails_Gear_0022  Blog___DIY_Light_Rails_Gear_0023

STEP 6: Attach the PP3 clips to the battery holders as shown next:

Blog___DIY_Light_Rails_Gear_0027

STEP 7: It is time to do carry out the electrical part of the job. As previously commented, you need to bear in mind that the light rails work with 12V, therefore if you use AA batteries, you need to connect 8 batteries in series.

If you have bought battery holders for 8 AA batteries you will just need to use one PP3 clip whose cables will go straight to the DC power connector in the right polarity. No further connections are required.

However did not use eBay for this and all I could find in Maplin were battery holders for 4 batteries and so 2 I bought. In my case, I needed to connect them together in series as the next schematics shows:

Schematics

And here you can find some pictures of how I physically made the connections:

Blog___DIY_Light_Rails_Gear_0028  Blog___DIY_Light_Rails_Gear_0029  Blog___DIY_Light_Rails_Gear_0030  Blog___DIY_Light_Rails_Gear_0031  Blog___DIY_Light_Rails_Gear_0032

To tidy up all the wiring I used again some 4mm cable clips and heatshrink tube that I contracted by puting the tip of the soldering iron close enough for a while (you can also use a hair drier if you have one available). If you do not have heatshrink tube you can use insulation tape instead or simply leave the cables unprotected, but I do not recommend that. Things properly done last longer so I suggest you are patient and go through all the steps .

STEP 8: Plug the connector into the IR Controller Box socket and there you have your light rail ready to rock!

Blog___DIY_Light_Rails_Gear_0036  Blog___DIY_Light_Rails_Gear_0037

STEP 9Switch off the lights of the room you are in at the moment, use the remote to power on the LEDs and play around with the different buttons to get an idea of the purpose of each one and of the posibilities the power rail can give you:

Blog___DIY_Light_Rails_Gear_0041

Blog___DIY_Light_Rails_Gear_0040

Blog___DIY_Light_Rails_Gear_0039

Blog___DIY_Light_Rails_Gear_0038

The final result!

Well, if this has not been enough for encouraging you to build your own, let’s try luck with a short

<WATCH VIDEO>

Some quick test shots

Pending of going out to properly inaugurate them (yes, I built 2 of them), I publish here some test shots for you to have a rough idea of what you could achieve!

Blog___DIY_Light_Rails_Gear_0043

Blog___DIY_Light_Rails_Gear_0044

Blog___DIY_Light_Rails_Gear_0045

Blog___DIY_Light_Rails_Gear_0046

Blog___DIY_Light_Rails_Gear_0047

Blog___DIY_Light_Rails_Gear_0048

Blog___DIY_Light_Rails_Gear_0049
If you liked this post, I invite you to click LIKE and/or suscribe to my blog for being aware of all the updates!

Thank you very much for reading!